TM 9-6115-646-14&P
(3)
Install one flat washer (2) and one nut (3) on each screw (1) Tighten hardware to secure bracket (4)
Figure 4-6. Fire Extinguisher Bracket Replacement
4-19 Front Step Replacement. (See figure 4-7 ) The roadside and curbside front steps are symmetrical, and
replacement procedures are the same for both
aRemoval.
(1)
Remove four screws (1, figure 4-7), eight flat washers (2) and four nuts (3) securing front step (4) to trailer frame
(5)
(2)
Remove three screws (6), six flat washers (7) and three nuts (8) securing front step (4) to fender bracket (9)
(3)
Remove two screws (10), four flat washers (11) and two nuts (12) securing front step (4) to support (13)
(4)
Lift front step (4) off of fender bracket (9) and support (13)
4-14
