NOTES:
ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
PROCEDURES:
1. Refer to TM 9-6115-644-24P for materials required
1. Install screws (2) and insulated terminals
and positioning of resistors by ohm rating.
(3) on bracket (1) as shown.
2. Solder diodes (4) to insulated terminals
(3) as shown.
3. Install screws (5) resistors (6) and nuts (7)
on bracket (1) as shown.
4. Position wires (8) and solder connections
as shown.
FIGURE D-23. Resistor-Diode Assembly (P/N: 88-22106)
D-23