ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
NOTES:
PROCEDURES:
1. Refer to TM 9-6115-644-24P for materials
1.
required and positioning of resistors by ohm
rating.
2.
3.
4.
Install screws (2) and insulated terminals
(3) on bracket (1) as shown.
solder diodes (4) to insulated terminals
(3) as shown.
Install screws (5) resistors (6) and nuts (7)
on bracket (1) as shown.
Position wires (8) and solder connections
as shown.
FIGURE D-22. Resistor-Diode Assembly (P/N: 88-22632)
D-22
