ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
NOTES:
PROCEDURES:
1. Dimensions shown are in inches.
1.
2. Refer to TM-9-6115-644-24P for materials
required.
2.
3.
4.
5.
Remove and discard terminals supplied
with fuel pump (1).
Strip 0.125 inch of insulation from end of
each pump (1) lead.
Crimp pin (2) on end of each lead.
Insert pins (2) into housing (3) with red
wire in position 1 and black wire in position
2.
Mark strap (4) with “P11” and install in
position shown.
FIGURE D-19. Pump Assembly, Fuel (P/N: 88-22546)
D-19
