ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
i. Remove assembled nuts (20), bolts (21), and bracket (22) from engine access door (6).
j. Remove assembled nuts (23), screws (24), and latches (25) from engine access door (6).
k. Drill out rivets (26), and remove fuel system diagram plate (27) from document box (9).
2,14.2.
Inspection.
a.
b.
c.
Shut down generator set.
Inspect access doors, hinges, latches, and baffles for loose and missing hardware, cracks, dents, loose paint, and
corrosion.
Inspect data plates for readability, and loose or missing rivets.
2.14.3. Repair
Wear a protective mask and gloves when sanding CARC painted sur-
faces. CARC paint dust is a health hazard and could cause personal
injury if warning is not followed.
a. Repair all dents and cracks, and remove loose paint.
b. Remove light corrosion with fine grit abrasive paper (Item 15, Appendix C).
c. Repaint surfaces in accordance with TM 43-0139. (F) Use applicable directives.
2-34
