ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
c. Open right side engine access door.
d. Loosen damp (3, FIGURE 2-28) and disconnect water drain line (4) from fuel filter/water separator.
e. Disconnect fuel lines (5) and (6).
f. Remove bolts (7), flatwashers (8), nuts (9), Iockwashers (10), and fuel filter/water separator head (11) with element
(2).
g. Cap all openings.
2.93.4. Repair.
a.
b.
c .
d .
e .
f.
Shut down generator set.
Open battery access door and disconnect negative battery cable.
Remove fuel filter/water separator, paragraph 2.93.3.
If damaged or if replacing fuel filter/water separator, remove and retain elbows (12, FIGURE 2-28) from head (11).
Install elbows (12).
Install fuel filter/water separator, paragraph 2.93.5.
2.93.5. Installation.
a .
b .
c .
d .
e .
f.
g.
Remove caps.
Install fuel filter/water separator head(11, FIGURE 2-28) with nuts (9), Iockwashers (10), bolts (7), and flatwashers
(8).
Install fuel lines (5) and (6).
Connect negative battery cable. Close battery access door.
Bleed air from fuel system, refer to TM 9-2815-254-24.
Start generator set and check for fuel leaks.
Close right side engine access door.
2-136 Change 1
