ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
a.
Repair all dents and cracks, and remove all loose paint.
b.
Remove light corrosion with fine grit abrasive paper (Item 15, Appendix C).
c.
Repaint surface in accordance with TM 43-0139. (F) Refer to applicable directives.
d. Replace missing or damaged cage nuts.
2.69.4.
Installation.
a.
Install latch plate (41, FIGURE 2-19) on control box bottom (42) with screws (39) and nuts (40).
b.
Install relay tracks (38) on control box bottom (42) with screws (36) and nuts (37).
c.
Install bracket (35) on control box bottom (42) with screws (34).
d.
Contact Direct Support Maintenance to install control box harness and AC voltage regulator.
e. Install control box components, paragraphs 2.41 through 2.49, 2.51 through 2.60, 2.64, and 2.65.
f.
Install control box side panels, paragraph 2.68.4.
g. Install control panel frame, paragraph 2.67.4.
h. Install control box assembly, paragraph 2.19.4.
i.
Connect negative battery cable and close battery access door.
2-104
