ARMY TM 9-6115-639-13 AIR FORCE TO 35C2-3-386-51 MARINE CORPS TM 10155A-13/1 4-41.  FUEL TANK PICKUP TUBE MAINTENANCE This task covers removal, inspection, and installation. INITIAL SETUP Tools: Equipment Condition: Tool Kit, General Mechanic’s Automotive Generator set shut down (Para. 2-9) (Item 2, App. B, Sect. III) Battery cables disconnected Cable disconnected for SLAVE RECEPTACLE A.    REMOVAL. 1. Unlock  main  access  cover  latches  and  lift  cover to open. 2. Disconnect hose (1, Figure 4-32) from elbow (2). 3. Remove fuel tank pickup tube (3) and gasket (8) from fuel tank (4) by removing three screws (5), lockwashers (6), and washers (7). B.    INSPECTION. 1. Inspect  pickup  tube  for  corrosion  and  obvious damage. 2. Inspect fuel hose for cuts, cracks, deterioration, or other  damage.    Check  for  evidence  of  leakage.   Inspect for crossed, stripped, or damaged threads. 3. Remove   and   replace   any   component   that   is damaged  to the extent that it will effect the safe operation of the generator set. C.    INSTALLATION. 1. Install fuel tank pickup tube (3, Figure 4-32) and gasket (8) onto fuel tank (4).  Secure using three screws (5), lockwashers (6), and washers (7). 2. Connect hose (1) to elbow (2).                                                                                       Figure 4-32.  Fuel Tank Pickup Tube 3. Close main access cover and lock in place. 4-84 Change 1