ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-35. LIFTING HANDLE MAINTENANCE
This task covers removal, inspection, and installation.
INITIAL SETUP
Tools:
Equipment Condition:
Tool Kit, General Mechanic’s Automotive
Generator set shut down (Para. 2-9)
(Item 2, App. B, Sect. III)
A. REMOVAL.
1.
Remove lifting handle (1, Figure 4-26) from
generator set skid base by removing screw (2),
washers (3, 4), and locknut (5).
2.
Unlock main access cover latches and lift cover to
open.
3.
Remove lifting handle (6) from skid base by
removing two screws (7), washers (8), locknuts
(9), and three screws (10), washers (11), and
locknuts (12).
B. INSPECTION.
Inspect lifting handles for corrosion and obvious
damage. Inspect lifting handle bracket for cracks
or deformation. Replace handle if damaged.
C. INSTALLATION.
1.
Install lifting handle (6, Figure 4-26) onto skid
base using two screws (7), washers (8), locknuts
(9), and three screws (10), washers (11), and
locknuts (12).
2.
Install lifting handle (1) onto skid base using
screw (2), washers (3, 4), and locknut (5).
Figure 4-26. Lifting Handles
3.
Close main access cover and lock in place using
latches.
4-72
