TM 55-6115-498-40
Figure 32. End Bell Assembly, Exploded View.
Legend For Figure 32:
Qty per
assy
Description
Part
number
Ref
END BELL ASSY (See item 38, fig. 31 for nha)
1544529
32-
4
. HOLDER, Electrical contact (ATTACHING
-1
1544527
PARTS)
4
. SCREW, Cap, hex hd. 5/16-18 thd x 1-1/8 in. lg
-2
1543503
4
. WASHER, Lock
-3
MS35338-45
4
. WASHER, Flat, cad. pl stl, for 5/16 in. screw
-4
867491
16
. WAS HE R, Insulating
-5
1543622
4
. TUBE, Insulating
-6
1328928
-- - - * - -+
1
. BELL, End
-7
1544432-1
terminal lug (19) from the E and B terminal
d. Generator Stator.
lugs, respectively.
(1) Do not disassemble generator stator
(4) Remove two self-locking nuts (2), two
(48, figure 3-1 ) unless replacement of damaged
parts or bearing bore metallizing is required.
lock washers (3), two washers (4), and two ter-
(2) Remove two self-locking nuts (2, fig-
minals ( 5 and 6), and disconnect the stator leads
ure 3-1 ), two lock washers (3), and two washers
from the A and D terminal studs.
[4) from the E and B terminal studs, if not re-
(5) Remove one bolt (7), one washer (8),
noved previously.
two bolts (10), two washers (11), terminal
(3) Remove terminal plates (5 and 6, fig-
board (9), and terminal board insulator (12).
ure 3-3) and disconnect electrical lead (18) and
