TM 55-6115-491-40
Table 2-1. Test Equipment Required (Sheet 3 of 3) - Continued
PART, MODEL,
OR MILDES
NOMENCLATURE
TECHNICAL
(OR EQUIVALENT)
DESCRIPTION
AN/USM-211
TS352BU
Capable of reading wide range resistances of 0-120 volts.
Variable Transformer Capable of supplying variable ac output from 120 volt, 60 cycle ac
input for PM magnet knockdown.
2-5. SPECIAL TOOLS.
2-6. Special tools required for general support maintenance of the generator are listed in table 2-2.
Table 2-2. Special Tools Required
PART, MODEL,
OR MILDES
NOMENCLATURE
TECHNICAL
(OR EQUIVALENT)
DESCRIPTION
Model 107A
Magnet charger
Capable of charging permanent magnet rotor.
(49673,)
No Number
Brush holder
Bar stock, square, 0.280-0.004.in.
alignment tool
support maintenance of the generator are listed in table
2-7. CONSUMABLE MATERIALS.
2-3.
2-8. Consumable materials required during general
Table 2-3. Consumable Materials Required
TYPE OR
GOVERNMENT
ITEM
MATERIAL
GRADE
SPECIFICATION
1
Lint-free cloth
CCC-C-440
2
Grease, aircraft, general purpose
MIL-G-7711A
3
Grease, aircraft, general purpose
MIL-G-81322
wide temperature range
4
Dielectric fluid
MIL-S-21568
5
Trichloroethylene
O-T-620
2-2
