TM 5-6115-640-14&P
4-8. GENERATOR LUBRICATION.
Refer to TM5-6115-615-12 for generator set Lubrication Order. Refer to items
2 thru 4, Appendix F, for lubricating items.
4-9. TRAILER ASSEMBLY LUBRICATION.
a.
Trailer Lubrication. Refer to TM9-2330-202-14&P for trailer Lubrication Order. Refer to items 2 thru 6, Appendix
F, for lubricating items.
b.
Leg Prop Assembly Lubrication. The rear leg prop assembly is a modification to the standard M116A2 trailer
and, as such, does not appear in the associated LO. Semiannually lubricate leg prop assembly as follows:
WARNING
Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes and prolonged exposure
of skin to cleaning solvent. Wash exposed skin thoroughly. Dry cleaning solvent, PD-68U, used
to clean parts is potentially dangerous to personnel and property. Do not use near open flame or
excessive heat. Flash point of solvent is 100°F to 138°F (38°C to 59°C).
(1)
Clean lubrication fitting (1, figure 4-3) and area around lubrication points with PO-680 (item 1, Appendix F)
or equivalent.
(2)
Inject sufficient GAA (item 6, Appendix F) grease into hydraulic fitting to lubricate screw threads (2) inside
leg base (3).
NOTE
Refer to Lubrication Order in TM9-2330-202-14&P for lubricating oils specified for use within
different anticipated temperature ranges.
(3)
Apply OE (items 2 or 3, Appendix F) lubricating oil to both ends of leg prop assembly pivot shaft (4).
Section IV. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
NOTE
The PMCS chart in this section contains all necessary unit preventive maintenance checks and
services for this equipment.
4-10
