TM 5-6115-640-14&P
CHAPTER 4
UNIT MAINTENANCE
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
4-1. INSPECTING AND SERVICING EQUIPMENT.
The power plants shall be unpacked, inspected and serviced as described in the following paragraphs. Unpacked
equipment must be checked against the equipment packing list to ensure completeness. Discrepancies must be reported
in accordance with instructions given in DA Pam 738-750.
a.
Unpacking Power Plant AN/MJQ-32 (Overseas: Classification B/A).
WARNING
Steel strapping used in packaging of the power plant has sharp edges. Care should be taken
when cutting and handling strapping to avoid injury to personnel.
WARNING
Basic Issue Items List (BIIL) box weighs approximately 125 pounds. Use at least two men when
removing box from stowage rack to avoid injury to personnel.
(1)
Remove and set aside packing list and shortage packing list (if applicable) from side of crate.
(2)
Using metal cutters, cut the steel strapping from around the crate and remove crate from trailer.
(3)
Cut the steel strappings which secure the BIIL box to the top of the stowage rack. Slide BIIL box forward
and remove from rack.
(4)
Cut. plastic tie-wraps securing fuel cans to interior of stowage rack and remove fuel cans.
(5)
Remove canvas cover from switchbox.
(6)
Uncrate the BIIL box and remove all packaging/cushioning material.
(7)
Remove packaging/cushioning material from all other accessories.
4-1
