Figure 5-6. Lifting Generator Set.

Figure 5-5. Detaching Generator Set from Trailer

TM-5-6115-632-14P Power Plant PU-751 (NSN 6115-00-033-1373) (2) MEP-002A 5 Kw 60 Hz Generator Sets (2) M116A1 2-Wheel 2-Tire Modified Trailers Manual
Page Navigation
52

TM 5-6115-632-14&P b. Installation. WARNING When lifting generator set, use lifting equipment with a minimum lifting capa- city of 1500 lb. Do not stand under generator while it is being lifted. Failure to observe these precautions can cause injury to personnel or damage to equipment. (1) Attach lifting equipment Figure 5-6. Lifting Generator Set. with a minimum lifting capacity of 1500 lb (1, figure 5-6) to lifting eye (2) on top of generator set (3) and lift generator. (2) Lower generator set (2, figure 5-5) onto trailer bed (4) and aline mounting holes. (3) Insert four bolts (5) with beveled washers (6) down through generator set skid and trailer bed (4). (4) Working under trailer, install one flat washer (7), one Iockwasher (8) and one nut (9) on each bolt (5). (5) Position beveled washers (6) so that bolt heads are parallel to top of washers. While hold- ing beveled washers in position, tighten hardware to secure generator set (2) to trailer (4). 5-9

Privacy Statement
Press Release
Contact