b. Footmans Loop Replacement.
TM 5-6115-632-14&P
(1) Remove two screws (4, figure 5-3), two flat washers (5), and two self-locking nuts (6)
securing footmans loop (7) to accessory box lid.
(2) Position new footmans loop (7) on accessory box (3) and install with two screws (4) two
washers (5), and two self-locking nuts (6).
5-6. Marking. (See figure 5-4.) The power unit four-digit registration number, preceded by the
prefix “VC” and the words “U.S. ARMY, ” is marked in three places on the trailer. Marking is done in
accordance with MIL-STD-642. On the fender, over each wheel, “T.P. 35 PSI” is marked in 1.00 ±
.12 inch high characters in accordance with MIL-STD-130. Figure 5-4 shows the approximate loca-
tion of markings on the power unit. If required, touch-up painting of the base color is done in
accordance with MIL-T-704, Type F, color Green, No. 383 of MIL-C-46168.
T.P. 35 PSI
Figure 5-4. Power Unit Markings.
Section Ill. GENERATOR SET
5-7. Generator Set Replacement. (See figures 5-5 and 5-6.)
a. Removal.
(1) Remove fitted cover (paragraph 3-11, a.(1)).
(2) Remove tarpaulin support and four bow assemblies (paragraph 3-11, b.(1)).
5-7
