TM 5-6115-631-14&P
Figure 4-5. Accessory Box Replacement.
a. Removal.
(1) Remove four screws (1, figure 4-5), eight flat washers (2), and four nuts (3) securing
accessory box (4) to trailer bed (5).
(2) Lift accessory box (4) off trailer bed (5).
b. Installation.
(1) Position accessory box (4) on trailer bed (5).
(2) Insert four screws (1) with flat washers (2) through accessory box mounting brackets and
trailer bed (5).
(3) Working under trailer, install one flat washer (2) and one nut (3) on each screw (l).
Tighten hardware to secure accessory box (4).
4-20.
Fire Extinguisher Bracket Replacement. (See figure 4-6.) Each of the two fire extinguishers
supplied with the power plant is carried in a bracket. One bracket is mounted on each fender.
Replacement procedures described below are the same for both brackets.
a. Removal.
(1) Remove four screws (1, figure 4-6), four flat washers (2) and four nuts (3) securing
bracket (4) to fender (5).
(2) Remove bracket (4) from fender (5).
4-16
