TM 5-6115-630-14&P
(g) Remove three screw (7), three flat washers (8), three Iockwashers (9), and three nuts (10) and
remove bracket (4) from trailer frame (11).
Figure 5-1. Leg Prop Assembly Replacement.
(2) Installation.
(a)
(b)
(c)
(d)
(e)
(f)
5-2
Position bracket (4) on trailer frame (11) and install three screws (7), three flat washers (8), three
Iockwashers (9) and three nuts (10). Tighten hardware to secure bracket.
Lift leg prop assembly into bracket (4) and secure by inserting angled bar(1) through holes in bracket
and boss (2) on upper leg (3).
Position leg prop assembly to line up boss (2) on top of leg with pivot holes in bracket (4). Insert pivot
shaft (6).
Insert cotter pin (5) in pivot shaft (6) and bend cotter pin legs in opposite directions.
Pull out angled bar (1) to unlock leg prop assembly.
Swing leg prop assembly up into traveling position and secure by inserting angled bar (1)
holes in bracket (4) and boss (2) on upper leg (3).
through
