TM 5-6115-630-14&P
b.
Installation.
(1) Position fuel can bracket (4) on fender (5).
(2) Insert four screws (1) down through bracket (4) and through fender (5).
(3) Install one washer (3) and one self-locking nut (2) on each screw (1). Tighten hardware to secure
bracket (4).
4-18. Accessory Box Replacement. (See figure 4-6.) The accessory box is mounted to the trailer bed
forward of the generator set.
a. Removal.
(1)
(2)
Remove four screws (1, figure 4-6), four flat washers (2), and four nuts (3) securing accessory box (4) to
trailer bed (5).
Lift accessory box (4) off trailer (5).
b.
(1) Position accessory box (4) on trailer bed (5).
(2) Insert four screws (1) through accessory box mounting brackets and trailer bed (5).
(3) Working under trailer, install one flat washer (2) and one nut (3) on each screw (1). Tighten hardware to
Installation.
secure accessory box (4).
Figure 4-6. Accessory Box Replacement.
4-14
Change 1
