TM 5-6115-630-14&P
4-19. Fire Extinguisher Bracket Replacement. (See figure 4-7.) The fire extinguisher supplied with
the power unit is carried in a bracket mounted on the rear of the trailer roadside fender.
a. Removal.
(1) Remove four screws (1, figure 4-7), four self-locking nuts (2), and four flat washers (3) securing bracket
(4) to fender (5).
(2) Remove bracket (4) from fender (5).
b. Installation.
(1) Position fire extinguisher bracket (4) on fender (5).
Figure 4-7. Fire Extinguisher Bracket Replacement.
(2) Insert four screws (1) down through bracket (4) and through fender (5).
(3) Install one flat washer (3) and one self-locking nut (2) on each screw (1). Tighten hardware to secure
bracket (4).
4-20. Leg Prop Assembly Servicing. Servicing of the leg prop assembly is limited to semiannual
lubrication (paragraph 4-9, b.).
Change 1
4-15/(4-16 blank)
