Table 3-2. Operator/Crew Preventive Maintenance Checks and Services (PMCS) (cont).
B - Before
Item to be inspected.
Procedure: check for and have repaired,
filled, or adjusted as needed
CIRCUIT BREAKER INDICATOR LIGHT
Push in on lens housing. Light (31) should
illuminate. If not, replace bulb.
BRAKE DRUMS AND HUBS
A defect in the operation of the brakes or hub
can cause these parts to get hot enough to
cause serious burns. Use extreme caution
when attempting to detect heat in this area.
Feel drums and hubs for overheating.
Open draincock (32) to drain moisture from air
reservoir (33) and close when finished.
Equipment is not
Brakes or hub are dragging