TM 5-6115-626-14&P
4-21.
Rear Steps Replacement. (See figure 4-9.) The roadside and curbside rear steps are sym-
metrical, and replacement procedures are the same for each.
a. Removal.
(1) Remove two screws (1, figure 4-9), two flat washers (2) and two nuts (3) securing rear
step bracket (4) and platform anchor (5) to trailer frame (6) under taillight (7).
Figure 4-9. Rear Steps Replacement.
(2) Remove two screws (8), four flat washers (9) and two nuts (10) securing rear step (11) to
trailer frame (6).
(3) Remove five screws (12), ten flat washers (13) and five nuts (14) securing rear step (11)
to fender (15). Remove rear step from trailer.
b. Installation.
(1) Position rear step (11) on trailer frame (6).
(2) Secure rear step (11) to trailer frame (6) with two screws (8), four flat washers (9) and
two nuts (10).
(3) Secure rear step (11) to fender (15) with five screws (12), ten flat washers (13) and five
nuts (14).
4-19