TM 3-1040-280-20&P
2-5.
INSTALLATION INSTRUCTIONS (CONT).
j.
Cable and Hose Assemblies (Cont).
INSTALLATION (CONT)
5
a.
Reinstall battery (10), battery holddown (9), and interconnecting battery cable (8) in battery box (3). Refer to TM
9-2320-280-20.
b.
Feed terminal ends of W1 cable assembly through 1-1 /8-inch hole in battery box. Connect vehicle positive
cable (6) and positive lead (15) of W1 to terminal clamp (7) of battery.
c.
Connect vehicle ground cable (4) and negative lead (16) of W1 cable assembly to negative terminal clamp (5) of
battery.
NOTE
Grommet is split and retainer is a hinged type that spreads apart.
d.
Install grommet (13) of W1 cable assembly and secure grommet in battery box with retainer (17) and two self-
tapping screws (18).
e.
Connect W1 cable assembly connector (19) to control panel connector 1J1.
2-16
