TM 3-1040-280-20&P
Section IV. M284 MAINTENANCE PROCEDURES
2-8.
INTRODUCTION . This section contains maintenance procedures which are the responsibility of the unit
maintenance technician as authorized by the maintenance allocation chart (MAC) (app B) and source, maintenance, and
recoverability (SMR) coded items in the repair parts and special tools list (RPSTL).
2-9.
M284 MOUNTING KIT.
This task covers painting and replacement of:
a.
Generator Bracket Assemblies
b.
Frame Assembly
c.
Compressor Mounting Plate
d.
Fuel Can Bracket Assembly
e.
Fuel Can Base Plate
f.
Fire Extinguisher
g.
Control Panel Mounting Bracket
h.
Fuel Lid Assembly
i.
Cable Assembly W1 (Power)
j.
Air Hose Assemblies
k.
Oil Hose Assemblies
PAINTING
INITIAL SETUP
Materials/Parts
References
Abrasive cloth (item 3, app D)
TM 43-0139
Dry cleaning solvent (item 4, app D)
Polyurethane coating (item 7, app D)
Primer coating (item 5, app D)
Rag (item 8, app D)
Paint brush (item 2, app D)
a.
Remove corrosion and chipped paint.
WARNING
Dry cleaning solvent is flammable and toxic. Keep it away from heat or
open flames. Use in well ventilated area. Avoid breathing vapors.
Failure to observe precautions may result in injury to personnel or
damage to equipment.
b.
Clean surface to be painted using rags and dry cleaning solvent.
c.
Paint surface with primer coating and polyurethane coating. See TM 43-0139.
2-20
