TM 3-1040-280-20&P
i.
Fire Extinguisher.
INSTALLATION
WARNING
Always wear eye protection when drilling. Eye injury may result if metal chips get into eyes.
Use a brush when cleaning up metal chips to avoid injury to hands.
NOTE
Left and right fire extinguisher brackets are installed the same way.
a.
Locate and mark hole (1) on top of wheelhouse (2) 18-1/2 inches from front edge and 3-1/2 inches from side.
b.
Locate and mark remaining three holes (3) using fire extinguisher bracket (4) as a template parallel to side of
wheelhouse.
c.
Center punch and drill four 9/32-inch diameter holes.
d.
Install fire extinguisher bracket on wheelhouse with four screws (5), eight washers (6), and four nuts (7).
e.
Install fire extinguisher (8) in bracket.
2-13
