TB 9-6115-644-13
4-22
ROPE HEATER.
This task covers:
a. Inspect
c. Replace
b. Test
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic's
Reference
(item 1, appendix B)
Materials/Parts
Sealant
Generator shut down, TM 9-6115-644-10, Paragraph 2-9.2
(item 1, appendix F)
Heater shut off, TB 9-6115-644-13, Paragraph 2-4.1.c
WARNING
Disconnect negative battery cable from right battery and the positive
battery cable from the left battery before doing the following
procedures. Failure to observe this warning could result in severe
personal injury or death.
INSPECTION
Inspect rope heater, Figure 4-43, for breaks, corrosion.
TEST
Conduct continuity tests using a multimeter or an ohm meter. If Rope Heaters tests positive, check thermostat for
proper operation.
REPLACEMENT
If breaks or corrosion is evident, replace the rope heater.
