Install control unit (1), Figure 5-4, with existing hardware mounted to the output box (2).
Disconnect generator fuel supply line (11), Figure 5-5, from fuel pickup tube assembly (12). Attach tee (10) to fuel
pickup tube assembly (12) and attach generator fuel supply line (11) to top of tee.
The proper connection of fuel lines using a hose is a butt joint.
Install adapter (9) to tee fitting (10) along with butt splice (7), fuel tubing (8), securing with clamps (6). Install fuel
pump (4) with clamp (5), using existing hardware mounted to the output box.
Install butt splice (7) with fuel tubing (8) to inlet of pump (4), securing with clamp (6). Attach butt splices (2) and
tubing (3) to outlet from pump (4) and to heater inlet tube using clamp (1).
Seal all pipe threads with sealing compound contained in kit.