TM 9-6150-228-13&P
4.13 DEADFRONT PANEL ASSEMBLY AND TOP COVER RESTRAINING CABLES.
This task covers: a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Automotive Tool Kit
Reference
(Item 2, Appendix B).
Para. 2-5 Equipment shut down.
Para 4.12 Top cover assembly removed.
Materials/Parts
General Safety Instructions
Tags (Item 14, Appendix E).
WARNING
Personnel Required
High voltage is present in this equipment
during operation. Do not attempt making
Two.
any repairs without first shutting down all
input power from the power distribution
panel. Failure to observe this warning
could result in serious injury or death.
REMOVAL
a.
Remove sixteen nuts (1, Figure 43) and screws (10) and remove deadfront panel assembly (6).
b.
Remove two lock nuts (7), screws (4) and restraining cables (5).
c.
Remove two nuts (9), star washers (8), screw (3) and fuse clips (2).
INSTALLATION
a. Install two fuse clips (2), screws (3), star washer (8) and nut (9).
b. Torque screws (3) per Appendix H.
c. Install two restraining cables (5) and secure with two screws (4) and nuts (7). Tighten nuts.
d. Install deadfront panel assembly (6), sixteen screws (10), and nuts (1). Tighten nuts.
4-19
