TM 9-6150-228-13&P
SECTION V. UNIT MAINTENANCE PROCEDURES
4.12 TOP COVER ASSEMBLY.
This task covers: a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Automotive Tool Kit
Reference
(Item 2, Appendix B).
Para. 2-5 Equipment shut down.
Materials/Parts
General Safety Instructions
Lock Nut (2)
WARNING
Personnel Required
High voltage is present in this equipment
during operation. Do not attempt making
Two.
any repairs without first shutting down all
input power from the power distribution
panel. Failure to observe this warning
could result in serious injury or death.
WARNING
Top cover must be supported when opened
to avoid serious injury to personnel.
REMOVAL
Failure to support the top cover when opened completely could result is damage to the hinges.
a.
Remove two lock nuts (1, Figure 42), screws (2), and restraining cable (3) from top cover assembly (4). Discard lock
nuts.
b.
Remove top cover assembly (4) from power distribution panel by sliding off hinge.
4-17
