TM 9-6150-228-13&P
APPENDIX H
TORQUE LIMITS
H.1
GENERAL. This appendix provides general torque limits for screws used on the power distribution panel. The
general torque limits given in this appendix shall be used when specific torque limits are not indicated in the maintenance
procedure. These general torque limits cannot be applied to screws that retain rubber components. The rubber compo-
nents will be damaged before the correct torque limit is reached. If a special torque limit is not given in the maintenance
instructions, tighten the screw or nut until it touches the metal bracket, then tighten it one more turn.
H.2
TORQUE LIMITS. Table H-1 lists dry torque limits. Dry torque limits are used on screws that do not have
lubricants applied to the threads.
H-1
