TM 9-6150-226-13
MAINTENANCE OF CABLE ASSEMBLIES
4-24 CABLE ASSEMBLY.
This task covers:
Test
INITIAL SETUP
Tools
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
Multimeter AN/PSM-45
General Safety Instructions
WARNING
High voltage is present in this
system.
DISE and PDISE supports
equipment using 120/208 V ac. Do
not replace a connector assembly
with the power on.
Death or
serious injury may result.
TEST
PERFORM CONTINUITY TEST.
a.
Disconnect both ends of cable from the DISE or PDISE equipment.
b.
Refer to paragraph 4-10e and Table 4-8 and perform a continuity test
on the cable.
c.
If cable is defective, send to next higher level of maintenance.
4-65
