TM 9-6150-226-13
4-23 LOAD TERMINAL.
This task covers:
Replacement
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic’s Automotive Tool Kit
Reference
SC 5180-90-CL-N26
Paragraph 4-21, lanyards and
terminal mounting board removed.
Materials/Parts
General Safety Instructions
Replacement Parts
WARNING
High voltage is present in this
system.
DISE and PDISE supports
equipment using 120/208 V ac. Do
not replace a connector assembly
with the power on.
Death or
serious injury may result.
REPLACEMENT
1.
REMOVE LOAD TERMINAL.
a.
Remove nuts (1) and
washers (2) securing load
terminal (3) to terminal
board (4).
b.
Remove load terminal (3).
2.
INSTALL LOAD TERMINAL.
a.
Insert load terminal (3)
through terminal board (4).
b.
Secure load terminal (3) to
terminal board (4) with
nuts (1) and washers (2).
4-63
