TM 9-6115-730-24
0108
INSTALLATION - Continued
4. If necessary, install two screws (Figure 1, Item 18), washers (Figure 1, Item 19), elbow (Figure 1, Item 17),
and gasket (Figure 1, Item 20).
5. Install hose (Figure 1, Item 16) and bonnet (Figure 1, Item 15) on elbow (Figure 1, Item 17). Do not tighten
hose clamps (Figure 1, Item 14).
6. Install three O-rings (Figure 1, Item 13), oil cooler (Figure 1, Item 12), three washers (Figure 1, Item 11), and
bolts (Figure 1, Item 10).
7. Install three washers (Figure 1, Item 9) and bolts (Figure 1, Item 8).
8. Install O-ring (Figure 1, Item 7), two O-rings (Figure 1, Item 6), coupling (Figure 1, Item 5), and elbow
(Figure 1, Item 4).
9. Install three washers (Figure 1, Item 3), one stud (Figure 1, Item 2), and two bolts (Figure 1, Item 1).
10. Tighten two hose clamps (Figure 1, Item 14).
11. Install turbocharger oil lines (WP 0103).
END OF TASK
END OF WORK PACKAGE
0108-4
