TM 9-6115-730-24
0089
DISASSEMBLY
1. Remove two screws (Figure 1, Item 7), control box mounting bracket (Figure 1, Item 8), and control box
faceplate (Figure 1, Item 9) from control box frame (Figure 1, Item 10).
NOTE
Tag and disconnect wiring during component removal.
2. Remove collar (Figure 1, Item 11), jam nut and lockwasher (Figure 1, Item 12), and LED holder (Figure 1,
Item 13) from control box faceplate (Figure 1, Item 8).
3. Remove jam nut and lockwasher (Figure 1, Item 14), and press-test indicator light (Figure 1, Item 15) from
control box faceplate (Figure 1, Item 8).
4. Remove jam nut and lockwasher (Figure 1, Item 16) and circuit breaker (Figure 1, Item 17) from control box
faceplate (Figure 1, Item 8).
5. Remove jam nut and lockwasher (Figure 1, Item 18) and toggle switch (Figure 1, Item 19) from control box
faceplate (Figure 1, Item 8).
6. Remove two screws (Figure 1, Item 20) and control box cover (Figure 1, Item 21) from control box frame
(Figure 1, Item 9).
7. Remove eight nuts (Figure 1, Item 22), screws (Figure 1, Item 23), connector J26 (Figure 1, Item 1) and J27
(Figure 1, Item 2) from control box frame (Figure 1, Item 9).
8. Remove two nuts (Figure 1, Item 24), washers (Figure 1, Item 25), screws (Figure 1, Item 26), and relay
(Figure 1, Item 27) from control box frame (Figure 1, Item 9).
9. Remove two nuts (Figure 1, Item 28), screws (Figure 1, Item 29), and terminal block and rectifier assembly
(Figure 1, Item 30) from control box frame (Figure 1, Item 9).
END OF TASK
ASSEMBLY
NOTE
Connect wiring as tagged and remove tags during component installation.
1. Install terminal block and rectifier assembly (Figure 1, Item 30) on control box frame (Figure 1, Item 9) with
two screws (Figure 1, Item 29) and nuts (Figure 1, Item 28).
2. Install relay (Figure 1, Item 27) on control box frame (Figure 1, Item 9) with two screws (Figure 1, Item 26),
washers (Figure 1, Item 25), and nuts (Figure 1, Item 24).
3. Install connectors J27 and J26 (Figure 1, Item 2) and (Figure 1, Item 1) on control box frame (Figure 1, Item
9) with eight screws (Figure 1, Item 23) and nuts (Figure 1, Item 22).
0089-3
