TM 9-6115-730-24
0080
REMOVAL
1. Ensure generator set is fully stopped, ENGINE CONTROL switch is OFF/RESET, Battery Disconnect Switch is
OFF, and DEAD CRANK SWITCH is OFF before proceeding.
2. Open left door.
3. Place suitable container under fuel filter (Figure 1, Item 1) to retain spillage.
4. Remove fuel filter (Figure 1, Item 1).
Figure 1. Fuel Filter.
END OF TASK
INSTALLATION
1. Clean area where fuel filter (Figure 1, Item 1) will mate with fuel filter base (Figure 1, Item 3).
2. Apply light coat of fuel to seal (Figure 1, Item 2).
3. Install fuel filter (Figure 1, Item 1) by hand until seal (Figure 1, Item 2) contacts fuel filter base. Turn an
additional 3/4 turn by hand.
4. Reset CAT SW1 FUEL FILTER RESET switch inside left rear door.
