TM 9-6115-730-24
0072
REMOVAL - Continued
3. Remove air cleaner indicator (Figure 1, Sheet 1, Item 1) from air cleaner (Figure 1, Sheet 1, Item 2).
4. Remove two clamps (Figure 1, Sheet 1, Item 3) and (Figure 1, Sheet 1, Item 4) and reducing elbow (Figure 1,
Sheet 1, Item 5) from air cleaner (Figure 1, Sheet 1, Item 2) and restricted tap sleeve (Figure 1, Sheet 1,
Item 6).
5. Remove sensor (Figure 1, Sheet 1, Item 7) from restricted tap sleeve (Figure 1, Sheet 1, Item 6).
6. Remove two clamps (Figure 1, Sheet 1, Item 8) and hose (Figure 1, Sheet 1, Item 9) from restricted tap sleeve
(Figure 1, Sheet 1, Item 6) and OUT port fitting on crankcase ventilation filter (Figure 1, Sheet 2, Item 10).
7. Remove clamp (Figure 1, Sheet 1, Item 11) and disconnect restricted tap sleeve (Figure 1, Sheet 1, Item 6)
from air vent hose (Figure 1, Sheet 1, Item 12).
8. Remove clamp (Figure 1, Sheet 1, Item 13) and disconnect air vent hose (Figure 1, Sheet 1, Item 12) from
engine turbo.
9. Remove two clamps (Figure 1, Sheet 2, Item 14) and hose (Figure 1, Sheet 2, Item 15) from IN port fitting on
crankcase ventilation filter (Figure 1, Sheet 2, Item 10) and engine crankcase filter adapter.
10. Remove two clamps (Figure 1, Sheet 2, Item 16) and disconnect hose (Figure 1, Sheet 2, Item 17) from swivel
fitting (Figure 1, Sheet 2, Item 18) on bottom of crankcase ventilation filter (Figure 1, Sheet 2, Item 10) and
from check valve (Figure 1, Sheet 2, Item 19) on left hand rear engine dipstick port.
11. Remove check valve (Figure 1, Sheet 2, Item 19) and elbow (Figure 1, Sheet 2, Item 20) from left hand rear
engine dipstick port.
12. Remove two screws (Figure 1, Sheet 2, Item 21), lockwashers (Figure 1, Sheet 2, Item 22), washers (Figure 1,
Sheet 2, Item 23), and crankcase ventilation filter (Figure 1, Sheet 2, Item 10) from bracket (Figure 1, Sheet 2,
Item 24).
WARNING
Air cleaner weighs 66 pounds (30 kg) and requires a two-person lift. Ensure proper lifting
techniques are used when lifting air cleaner. Failure to comply can cause injury to personnel.
13. Loosen nut (Figure 1, Sheet 1, Item 25) on each air cleaner mounting band (Figure 1, Sheet 1, Item 26).
Remove air cleaner (Figure 1, Sheet 1, Item 2).
14. Loosen captive wing nut (Figure 1, Sheet 1, Item 28) and remove air cleaner cover (Figure 1, Sheet 1,
Item 27), and remove air cleaner (Figure 1, Sheet 1, Item 2) from air cleaner mounting bands (Figure 1,
Sheet 1, Item 26).
15. Remove four locknuts (Figure 1, Sheet 1, Item 29), washers (Figure 1, Sheet 1, Item 30), screws (Figure 1,
Sheet 1, Item 31), and two air cleaner mounting bands (Figure 1, Sheet 1, Item 26).
16. Remove two hose fittings (Figure 1, Sheet 2, Item 32) from crankcase ventilation filter (Figure 1, Sheet 1,
Item 10).
0072-2
