TM 9-6115-730-24
0052
INSTALLATION - Continued
5. Install current transformer bracket (Figure 1, Sheet 1, Item 8), four lockwashers (Figure 1, Sheet 1, Item 7),
washers (Figure 1, Sheet 1, Item 6), and screws (Figure 1, Sheet 1, Item 5).
6. Put one end of cables through each of three current transformers (Figure 1, Sheet 1, Item 1) to be installed
adjacent to main load contactor, remove tags, and connect end of each cable.
washers (Figure 1, Sheet 1, Item 3), and screws (Figure 1, Sheet 1, Item 2). Remove tags and connect
sensor wires located on top of current transformers.
8. Close left rear doors.
9. Close right rear doors.
END OF TASK
END OF WORK PACKAGE
0052-5/6 blank