TM 9-6115-730-24
0042
DISASSEMBLY - Continued
27. To remove DVR bracket (Figure 2, Sheet 4, Item 104), remove two screws (Figure 2, Sheet 4, Item 105),
lockwashers (Figure 2, Sheet 4, Item 106), washers (Figure 2, Sheet 4, Item 107), and bracket. To remove
DVR bracket (Figure 2, Sheet 4, Item 108), remove three screws (Figure 2, Sheet 4, Item 109), lockwashers
(Figure 2, Sheet 4, Item 110), washers (Figure 2, Sheet 4, Item 111), and bracket.
28. To remove resistor assembly A7 (Figure 2, Sheet 5, Item 112), remove two screws, remove two lockwashers,
113A and two flat washers, 113B (Figure 2, Sheet 5, Item 113) and resistor assembly.
29. To remove ground stud (Figure 2, Sheet 5, Item 114), remove two locknuts (Figure 2, Sheet 5, Item 115), two
jam nuts (Figure 2, Sheet 5, Item 116), two lockwashers (Figure 2, Sheet 5, Item 117), external tooth
lockwasher (Figure 2, Sheet 5, Item 118), two washers (Figure 2, Sheet 5, Item 119), and ground stud.
END OF TASK
ASSEMBLY
1. Install ground stud (Figure 2, Sheet 5, Item 114), two washers (Figure 2, Sheet 5, Item 119), external tooth
lockwasher (Figure 2, Sheet 5, Item 118), two lockwashers (Figure 2, Sheet 5, Item 117), two jam nuts
(Figure 2, Sheet 5, Item 116), and two locknuts (Figure 2, Sheet 5, Item 115).
2. Install resistor assembly A7 (Figure 2, Sheet 5, Item 112) and two screws (Figure 2, Sheet 5, Item 113).
3. Install DVR bracket (Figure 2, Sheet 4, Item 108), three washers (Figure 2, Sheet 4, Item 111), lockwashers
(Figure 2, Sheet 4, Item 110), and screws (Figure 2, Sheet 4, Item 109). Install DVR bracket (Figure 2,
Sheet 4, Item 104), three washers (Figure 2, Sheet 4, Item 107), lockwashers (Figure 2, Sheet 4, Item 106),
and screws (Figure 2, Sheet 4, Item 105).
4. Install capacitor (Figure 2, Sheet 4, Item 103) and two screws (Figure 2, Sheet 4, Item 102) on digital voltage
regulator (DVR) A3 (Figure 2, Sheet 4, Item 98). Install gasket (Figure 2, Sheet 4, Item 101), digital voltage
regulator (Figure 2, Sheet 4, Item 98), four screws (Figure 2, Sheet 4, Item 100), and nuts (Figure 2, Sheet 4,
Item 99).
5. Install connector J37 (Figure 2, Sheet 4, Item 95), four screws (Figure 2, Sheet 4, Item 97), and nuts
(Figure 2, Sheet 4, Item 96).
6. Install connector J30 (Figure 2, Sheet 4, Item 91), four screws (Figure 2, Sheet 4, Item 93), and nuts
(Figure 2, Sheet 4, Item 92). Repeat for connector J31 (Figure 2, Sheet 4, Item 94).
7. Install track (Figure 2, Sheet 4, Item 83), three washers (Figure 2, Sheet 4, Item 90), three screws (Figure 2,
Sheet 4, Item 89), three nuts (Figure 2, Sheet 4, Item 88), two clips (Figure 2, Sheet 4, Item 87), two insulator
blocks (Figure 2, Sheet 4, Item 86), two washers (Figure 2, Sheet 4, Item 85), and two screws (Figure 2,
Sheet 4, Item 84).
8. Install socket (Figure 2, Sheet 4, Item 82), relay PAR (Figure 2, Sheet 4, Item 81), and spring (Figure 2,
Sheet 4, Item 76).
9. Install socket (Figure 2, Sheet 4, Item 80), relay DBLO (Figure 2, Sheet 4, Item 78), and spring (Figure 2,
Sheet 4, Item 76).
10. Install socket (Figure 2, Sheet 4, Item 77), relay KFF (Figure 2, Sheet 4, Item 75), GFR (Figure 2, Sheet 4,
Item 74), AR (Figure 2, Sheet 4, Item 73), AFPR (Figure 2, Sheet 4, Item 72), CDR (Figure 2, Sheet 4,
Item 71), KR (Figure 2, Sheet 4, Item 70), and spring (Figure 2, Sheet 4, Item 76).
0042-11
