TM 9-6115-730-24
0024
DISASSEMBLY - Continued
4. Remove four nuts (Figure 1, Item 15), screws (Figure 1, Item 16), and wrench mounting plate (Figure 1,
Item 17).
5. Remove foam damping sheets as required.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping sheets as template to cut new foam damping sheets.
2. Install foam damping sheets.
3. Install wrench mounting plate (Figure 1, Item 17), four screws (Figure 1, Item 16), and nuts (Figure 1,
Item 15).
4. Install hinge (Figure 1, Item 14), cord (Figure 1, Item 13) and wrench (Figure 1, Item 12), and secure with
screw (Figure 1, Item 11) and nut (Figure 1, Item 10).
5. Install latch (Figure 1, Item 1) and secure with four screws (Figure 1, Item 9) and nuts (Figure 1, Item 8).
6. Install three screws (Figure 1, Item 7) and nuts (Figure 1, Item 6).
END OF TASK
INSTALLATION
1. Install load board door assembly (Figure 1, Item 2) and secure with four lockwashers (Figure 1, Item 5),
washers (Figure 1, Item 4), and screws (Figure 1, Item 3).
2. Close load board door assembly (Figure 1, Item 2) and secure by rotating and closing latch (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0024-3/4 blank
