TM 9-6115-730-24
0025
DISASSEMBLY - Continued
4. Remove twelve screws (Figure 1, Item 16), washers (Figure 1, Item 17), lockwashers (Figure 1, Item 18), and
duct (Figure 1, Item 19).
5. Remove eight foam damping sheets as required.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping sheets as templates to cut new foam damping sheets.
2. Install eight damping sheets.
3. Install duct (Figure 1, Item 19) and secure with twelve lockwashers (Figure 1, Item 18), washers (Figure 1,
Item 17), and screws (Figure 1, Item 16).
4. Install holding rod bracket (Figure 1, Item 15), door holding rod (Figure 1, Item 14), door holding bracket
(Figure 1, Item 13), and secure with four screws (Figure 1, Item 12), and nuts (Figure 1, Item 11).
5. Install two latches (Figure 1, Item 1) and secure with eight screws (Figure 1, Item 10) and nuts (Figure 1,
Item 9).
6. Install hinge (Figure 1, Item 8) and secure with thirteen screws (Figure 1, Item 7) and locknuts (Figure 1,
Item 6).
END OF TASK
INSTALLATION
1. Install right front door assembly (latch) (Figure 1, Item 2) and secure with thirteen lockwashers (Figure 1,
Item 5), washers (Figure 1, Item 4), and screws (Figure 1, Item 3).
2. Close right front door assembly (latch) (Figure 1, Item 2) and secure by rotating and closing two latches
(Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0025-3/4 blank
