TM 9-6115-730-24
0019
DISASSEMBLY - Continued
2. Remove four screws (Figure 1, Item 9), nuts (Figure 1, Item 10), holding rod bracket (Figure 1, Item 11), door
holding rod (Figure 1, Item 12), and door holding bracket (Figure 1, Item 13).
3. If necessary, remove six screws (Figure 1, Item 14), spacers (Figure 1, Item 15), and foam damping
(Figure 1, Item 16).
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping as template to cut new foam damping sheet.
2. Install foam damping (Figure 1, Item 16) on left battery access door (Figure 1, Item 3) and secure with six
spacers (Figure 1, Item 15) and screws (Figure 1, Item 14).
3. Install door holding bracket (Figure 1, Item 13), door holding rod (Figure 1, Item 12), and holding rod bracket
(Figure 1, Item 11) and secure with four nuts (Figure 1, Item 10) and screws (Figure 1, Item 9).
4. Install hinge (Figure 1, Item 8) and secure with seven screws (Figure 1, Item 7) and locknuts (Figure 1, Item
6).
END OF TASK
INSTALLATION
1. If removed, install seal.
2. Install left battery access door (Figure 1, Item 3) and secure with seven screws (Figure 1, Item 5) and
locknuts (Figure 1, Item 4).
3. Close left and right battery access doors (Figure 1, Item 3) and (Figure 1, Item 2) and secure by rotating and
closing two latches (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0019-3/4 blank
