TM 9-6115-730-24
0013
ELECTRONIC TECHNICIAN (ET) TROUBLESHOOTING - Continued
CORRECTIVE ACTION - Continued
Figure 3. Timing Sensors.
e. Ensure that one O-ring (Figure 3, Item 6) is installed on each sensor. Check
the O-rings for damage. Replace the O-rings, if necessary.
f.
If the sensors appear undamaged, perform the following steps.
(1) Lubricate each O-ring ring (Figure 3, Item 6) with clean engine oil.
(2) Fully seat the sensor assembly (Figure 3, Item 1 or Item 2) in the engine.
