TM 9-6115-730-24
HOW TO USE THIS MANUAL - Continued
WP 0005 contains a Field level troubleshooting index. This index is followed by the troubleshooting procedures in a
series of related WPs.
WP 0006 contains troubleshooting procedures to be followed for dedicated GSC shutdown indicator lights.
WP 0009 contains troubleshooting procedures for GSC Fault Codes based on generator set and engine monitoring
electronics for identify operating problems. These procedures contain all the CID FMI fault code combinations that
you will see displayed on the GSC display and directs you to the appropriate fault isolation procedure.
WP 0012 tells you how to prepare the TQG for use with the Maintenance Support Device (MSD), if available, for using
Caterpillar Electronics Technician (Cat ET) engine diagnostic software. A laptop or SPORT running with MS Windows
2000 or higher can also be used. The WP describes how to load all software required for proper operation of
diagnostics software on your computer in a logical sequence. This includes the software for Caterpillar
Communications Adapter II that you must preload on your computer before using the diagnostics software. It also
includes instructions for loading the ET software and other necessary instructions or documentation onto your
computer.
WP 0012 also contains instructions required for obtaining software license for the Cat ET tool and maintaining the
assigned registration number for the ET tool license. It also includes instructions for loading the ET software and
other necessary documentation onto your computer.
Before using the MSD and the Cat ET, software for Caterpillar Communication Adapter II should also be preloaded as
described in WP 0012. Refer to Caterpillar Service Tool Hardware and Software/User's Manual Communication
Adapter II, Ver 1.93 (1.9-B4) and CD NEHS0758.
UNIT (FIELD) LEVEL MAINTENANCE WORK PACKAGES
Chapter 3 Unit (Field) Level Maintenance Instructions contains Unit (Field) Level Maintenance Instructions work
packages for the Generator Set.
Read the INITIAL SETUP section of each maintenance work package carefully before you start any maintenance
procedure. Get the tools and supplies listed and the personnel needed.
Chapter 4 Unit (Field) Level Troubleshooting Work Packages for Winterization Kit contains Unit (Field) Level
Troubleshooting work packages for the optional winterization kit installation.
xi
