TM 9-6115-730-10
200 kW TACTICAL QUIET GENERATOR SET
ENGINE LUBRICATION SYSTEM MAINTENANCE
THIS WORK PACKAGE COVERS:
Inspection
Service
INITIAL SETUP:
Maintenance Level
References
Operator
None
Tools and Special Tools
Materials/Parts
None
MIL-L-46167 OEA (item 6, WP 0022 00)
MIL-PRF-2104 OE/HDO-10
(items 7, 8, or 9, WP 0022 00)
Personnel Required
MIL-PRF-2104 OE/HDO-30
(items 10 or 11, WP 0022 00)
One
MIL-PRF-2104 OE/HDO-40
(item 15, WP 0022 00)
MIL-PRF-2104 OE/HDO-15/40
(items 12, 13 or 14, WP 0022 00)
INSPECTION
1.
On EMCP, set ENGINE CONTROL switch to OFF/RESET and let cool.
2.
Open both engine access doors.
3.
Inspect engine assembly for oil leaks.
4.
Check for damage, proper mounting, or missing parts.
CAUTION
The dipstick is marked so that the crankcase oil can be checked while engine is stopped or running.
Always make sure dipstick is checked. Remove oil filler cap when checking oil with engine
running.
5.
Remove oil dipstick (1) to check engine crankcase oil level. Dipstick is marked on both sides for stopped or running
engine. If crankcase oil level is below ADD mark on dipstick, for either stopped or running engine, perform SERVICE
task.
6.
Close both engine access doors.
END OF TASK
SERVICE
1.
On EMCP, set ENGINE CONTROL switch to OFF/RESET and let engine cool.
2.
Open right engine access door.
3.
Remove oil filler cap (2).
4.
Add oil to engine crankcase for operations temperature range per Table 1.
0017 00-1
