TM 9-6115-730-10
200 kW TACTICAL QUIET GENERATOR SET
0016 00
ENGINE FUEL SYSTEM MAINTENANCE Continued
INSPECTION
Fuel Tank Inspection
1.
Verify that DEAD CRANK SWITCH is set to NORMAL and Battery Disconnect switch is ON.
2.
On GSC, set ENGINE CONTROL to COOL DOWN STOP.
3.
Check fuel level by observing fuel level indicator.
4.
Remove fuel cap (1) and ensure strainer in filler tube (2) is free of dirt and other foreign material. If dirt or debris are
present, clean strainer.
5.
On EMCP, set ENGINE CONTROL switch to OFF/RESET.
Fuel Filter/Water Separator Inspection
1.
On EMCP, set ENGINE CONTROL switch to OFF/RESET.
2.
Open front left engine access door.
3.
Inspect fuel filter/water separator assembly for proper mounting, cracks, dents, leaks, loose fuel lines and other damage.
4.
Inspect fuel filter/water separator for sediment or water and perform Fuel Filter/Water Separator Service procedures
5.
Close front left engine access door.
END OF TASK
0016 00-2
