ENGINE COOLING SYSTEM MAINTENANCE
THIS WORK PACKAGE COVERS:
Tools and Special Tools
Cooling system operates at high temperature and pressure. Contact with high pressure steam and/or
liquids can result in burns and scalding. Shut down generator set, and allow system to cool before
performing checks, services and maintenance. Failure to comply can cause injury or death to
On EMCP, set ENGINE CONTROL switch to OFF/RESET.
Open all engine access doors.
Check fan guards and shroud for dirt and debris blocking air flow.
Check radiator and hoses for leaks, loose connections, loose mountings, corrosion, chafing, and missing parts.
If coolant level in coolant recovery (overflow) bottle is above HOT line, check for GSC fault HIGH WATER TEMP red
Check coolant level at coolant recovery (overflow) bottle. Perform SERVICE if coolant level in recovery (overflow)
bottle is below HOT line if coolant is hot or below COLD line if coolant is cold.
Close all engine access doors.
END OF TASK