TM 9-6115-730-10
200 kW TACTICAL QUIET GENERATOR SET
0005 00
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS Continued
DIGITAL VOLTAGE REGULATOR
Table 4 describes the EMCP DVR module controls and indicators. DVR is a module that displays 3-digit DVR fault codes
(WP 0009 00). Operator can only record the alarm codes and notify maintenance when DVR Fault Codes are displayed.
Operators are not authorized to use this control to change TQG settings.
Table 4. Digital Voltage Regulator Controls and Indicators.
CONTROL OR
KEY
INDICATOR
FUNCTION
1
Display area
Displays three-digit DVR fault codes (WP 0009 00). Also displays numbers
representing different parameters of DVR system. Display and keypad are
used to select and manipulate parameter values that control operation of DVR.
Colon indicates that number is a parameter code. If colon is not present, the
number is a parameter value.
2
Keypad
Used to change information shown on display. FOR MAINTENANCE
PERSONNEL USE ONLY.
Function key used to toggle between parameter code and parameter value for the
code and to enter new code or value into DVR memory.
Scroll down key is used to move down to previous parameter code or decrease
value.
Scroll up key is used to move up to next parameter code or increase value.
0005 00-10
