TM 9-6115-729-24
0093
INSTALLATION - Continued
10. Install two hose clamps (Figure 1, Sheet 2, Item 17) with two screws (Figure 1, Sheet 2, Item 15) and two nuts
(Figure 1, Sheet 2, Item 16).
11. Connect hose (Figure 1, Sheet 1, Item 14) to shutoff valve (Figure 1, Sheet 1, Item 2) located below alternator
and install hose clamp (Figure 1, Sheet 1, Item 13).
12. Install 90-degree hose elbow (Figure 1, Sheet 2, Item 12) and hose mender fitting (Figure 1, Sheet 2, Item 9)
on bottom of heater (Figure 1, Sheet 2, Item 10) and install two hose clamps (Figure 1, Sheet 2, Item 11).
13. Connect hose (Figure 1, Sheet 1, Item 4) to hose mender fitting (Figure 1, Sheet 2, Item 9) and install hose
clamp (Figure 1, Sheet 2, Item 8).
14. Install hose clamp (Figure 1, Sheet 2, Item 7) with screw (Figure 1, Sheet 2, Item 5) and lockwasher (Figure 1,
Sheet 2, Item 6).
15. Connect hose (Figure 1, Sheet 1, Item 4) to shutoff valve (Figure 1, Sheet 1, Item 1) located behind alternator
and install hose clamp (Figure 1, Sheet 1, Item 3).
16. Open shutoff valves (Figure 1, Sheet 1, Item 1) and (Figure 1, Sheet 1, Item 2).
17. Refill coolant system (WP 0064).
18. Close right and left front doors and battery access doors.
END OF TASK
END OF WORK PACKAGE
0093-6
