TM 9-6115-729-24
0036
ASSEMBLY
1. If necessary, use old foam damping sections as templates to cut new foam damping sections. Install six new
foam damping sections.
2. Install duct (Figure 1, Item 9) and secure with 11 screws (Figure 1, Item 8).
3. Install coolant recovery system and bracket (Figure 1, Item 7) and secure with two screws (Figure 1, Item 6).
END OF TASK
INSTALLATION
1. Install rear right center panel assembly (Figure 1, Item 5) and secure with seven lockwashers (Figure 1, Item
4), seven washers (Figure 1, Item 3), five screws (Figure 1, Item 2), and two screws (Figure 1, Item 1).
3. Install right front door assembly (latch) (WP 0025).
END OF TASK
END OF WORK PACKAGE
0036-3/4 blank