TM 9-6115-729-24
0019
DISASSEMBLY - Continued
3. Remove four nuts (Figure 1, Item 13), screws (Figure 1, Item 14), holding rod bracket (Figure 1, Item 15),
door holding rod (Figure 1, Item 16), and door holding bracket (Figure 1, Item 17).
4. Remove foam damping sheet if required.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping sheet as template to cut new foam damping sheet.
2. Install foam damping sheet.
3. Install door holding bracket (Figure 1, Item 17), door holding rod (Figure 1, Item 16), and holding rod bracket
(Figure 1, Item 15) and secure with four screws (Figure 1, Item 14) and nuts (Figure 1, Item 13).
4. Install storage box assembly (Figure 1, Item 12) and secure with nine screws (Figure 1, Item 11) and nuts
(Figure 1, Item 10).
5. Install hinge (Figure 1, Item 9) and secure with eight screws (Figure 1, Item 8) and locknuts (Figure 1, Item 7).
END OF TASK
INSTALLATION
1. Install left battery access door and hinge (Figure 1, Item 3) and secure with five screws (Figure 1, Item 6),
washers (Figure 1, Item 5), and locknuts (Figure 1, Item 4).
2. Close left and right battery access doors (Figure 1, Item 3) and (Figure 1, Item 2) and secure by rotating and
closing two latches (Figure 1, Item 1).
END OF TASK
END OF WORK PACKAGE
0019-3/4 blank