TM 9-6115-729-24
0018
DISASSEMBLY - Continued
4. Remove four nuts (Figure 1, Item 14), screws (Figure 1, Item 15), holding rod bracket (Figure 1, Item 16),
door holding rod (Figure 1, Item 17), and door holding bracket (Figure 1, Item 18).
5. Remove two foam damping sheets if required.
END OF TASK
ASSEMBLY
1. If necessary, use old foam damping sheets as templates to cut new foam damping sheets.
2. Install two foam damping sheets.
3. Install door holding bracket (Figure 1, Item 18), door holding rod (Figure 1, Item 17), and holding rod bracket
(Figure 1, Item 16) and secure with four screws (Figure 1, Item 15) and nuts (Figure 1, Item 14).
4. Install two latches (Figure 1, Item 1) and secure with eight screws (Figure 1, Item 13) and nuts (Figure 1, Item
12).
5. Install document box assembly (Figure 1, Item 11) and secure with nine screws (Figure 1, Item 10) and nuts
(Figure 1, Item 9).
6. Install hinge (Figure 1, Item 8) and secure with eight screws (Figure 1, Item 7) and locknuts (Figure 1, Item 6).
END OF TASK
INSTALLATION
1. Install right battery access door and hinge (Figure 1, Item 2) and secure with eight screws (Figure 1, Item 5),
washers (Figure 1, Item 4), and locknuts (Figure 1, Item 3).
2. Close right battery access door (Figure 1, Item 2) and secure by rotating and closing two latches (Figure 1,
Item 1).
END OF TASK
END OF WORK PACKAGE
0018-3/4 blank